Daily Q&A

Yes, powered PA speakers are usually a good used buy: cabinets and drivers last 15+ years, and the amp module is the only real wear item. Budget 20 percent of the price for a possible module swap.
Most used pro audio sells for 40-60% of new retail when it is 5-10 years old. Console prices drop fastest, speakers hold value, and anything with a dead screen loses half its price overnight.
A grade label tells you about cosmetics, not function. 'Like New' usually means no visible marks and full test pass; 'Excellent' allows light rack rash. Always demand a test report and photos of the actual unit.
Yes if the unit is hard-wired for 220-240V and your mains is 110-120V. Read the rear label first: gear marked 100-240V needs only a plug adapter, not a converter. If it says 220V only, you need a step-up transformer rated…
A 20ft container from Shenzhen or Ningbo costs about $1,800-4,200 to most major ports in 2026, which works out to $10-25 per speaker box when full. Air freight runs $4-9 per kg. A single speaker by courier costs $80-150, so…
Used studio monitors save 40-55% and usually sound identical to new, because a sealed cabinet and a Class AB amp age slowly. What matters is cone condition, idle hiss and whether the pair was matched. A used 6-inch pair runs…
Check the crossfader, both jog wheels, every RCA and XLR socket, and the power supply before paying. Faders wear out in 3-5 years of club use and a replacement crossfader costs $40-120. A used CDJ-style deck runs $250-600, a 2-channel…
Tap the body lightly and listen for rattle, speak at three distances to check for diaphragm collapse, wiggle the cable at the connector to expose a bad XLR, and inspect the grille for dents that have pushed into the capsule.…