Daily Q&A

Flying with used DJ gear typically costs $75-$300 for one extra checked bag and $300-$900 in excess fees for a two-bag setup. Controllers and 2-channel mixers travel fine; turntables and 12-inch subs are cheaper to ship than to fly.
Most imported professional audio gear does not need a converter: it ships with a voltage selector or a universal 100-240 V supply. A converter is only needed for fixed-voltage units and for gear bought in a 100 V market like…
Shipping used audio equipment from China costs about $95-$190 per cubic metre by sea LCL, or $1,800-$4,200 for a 20ft container depending on destination. Air freight runs 4-6x that, so it only pays for small high-value items like consoles.
Used studio monitors are worth buying when both cabinets match within 1 dB and neither driver has been replaced. Age matters far less than driver pairing, room treatment and whether the pair has been moved often.
When buying used DJ equipment, check the crossfader and cue buttons first, then platter torque, then the phono stage, then the power supply. Cosmetics come last because they tell you the least about whether the gear will survive a gig.
A used microphone takes about 10 minutes to test: tap the body for capsule rattle, sweep it across the voice band, wiggle the XLR, and check the grille for dents. Drop damage shows up as a rattle at 200-400 Hz,…
A used Yamaha DM1000 is still a good buy in 2026 for installed systems, houses of worship and touring rigs that need 48 channels in one box. Skip it if you rely on 96 kHz recording, tablet control or USB…
A used powered PA speaker is usually worth buying: 40-60% off new price, half the cable runs, and failures you can test in ten minutes. Skip it if the cabinet was stored outdoors or the horn has been repaired.