Daily Q&A

What do “Excellent” and “Like New” mean for used audio gear?

Answered on November 22, 2026

Short answer: “Like New” should mean cosmetic marks you need to look for, and “Excellent” should mean a working unit with visible wear on the cabinet but nothing that affects sound. The problem is that no two sellers define these words the same way, so the grade means less than the test results behind it.

Where do these grades come from?

They come from camera resale, not audio. Dealers like KEH and MPB popularised a Like New / Excellent / Good ladder for lenses, where scratches are easy to see and shutter counts are recorded. Audio sellers copied the wording because it sounds reassuring, but there is no equivalent of a shutter count for a loudspeaker. Two speakers with identical cabinets can differ by 2,000 hours of play time and 15 dB of high-frequency output, because compression drivers lose output as their diaphragms fatigue and nobody writes that number on the label.

What should each grade actually mean?

GradeCabinetDriversExpected price vs newLike New
No dents, grille straightOriginal cones, no recone55-65%ExcellentLight scuffs, corners sound
Original cones, foam intact40-55%Very GoodVisible dents, grille bentMay be reconed
28-40%FairCracks, missing hardwareRecone needed15-25%

If a seller cannot tell you which row their unit sits in, the grade is decoration. Ask them to describe the cabinet corners and whether either driver has been reconed. Those two answers tell you more than the label.

Why is the cabinet grade less important than driver hours?

A scuffed corner costs nothing. A tired driver costs $80-$200 to recone, and a mismatched replacement driver will make a stereo pair sound different in ways you cannot fix with EQ. On a $600 pair of speakers, a recone is 25% of the price, and the pair may never match again.

So when you see “Excellent” on a listing, treat it as a statement about paint, not about performance. The useful question is: how many hours, and who ran it?

What does the grade hide in consoles and amps?

More, in some ways. A console can look flawless and still have scratchy faders, which cost $40-$90 each to replace on a 32-channel desk. An amp can test clean at idle and fail at 70% of its rated load. Physical grading almost never covers those failure modes.

With digital gear, ask for the firmware version and the date of the last battery replacement. A “Like New” 2010 console with a dead coin cell will lose scenes on every power cycle, and that is a $15 part plus two hours of panel removal.

How should you verify a grade before paying?

  • Ask for photos of all four cabinet corners and the grille at arm’s length.
  • Ask for a video of a sine sweep, not a music clip — music hides rattle.
  • Ask whether either driver has been reconed, and if so, with which part.
  • For consoles, ask for the fader test page and the firmware number.
  • For amps, ask for a load test at 8 ohms, not just an idle power-on.

A seller who can answer those five questions has a real grading process. A seller who replies “it is in great condition” has not graded anything.

Does a higher grade ever get you a better deal?

Rarely. Sellers price the grade, not the history. In practice, a Very Good unit with a documented service record and a recent recone is a better buy than an unverified Excellent one at 20% more. Pay for evidence, not adjectives.

You can compare graded listings side by side on our used sound equipment shop page, where each unit shows its cabinet grade and test result separately.

Key Takeaways

  • “Like New” and “Excellent” are copied from camera resale and have no audio standard.
  • Excellent usually means 40-55% of new price; Like New 55-65%.
  • Ask about driver hours and recones — the label says nothing about them.
  • Scratchy faders and weak amp channels are the failures a grade never covers.
  • A documented service history beats a higher grade at 20% more money.