Used speakers for sale are only a bargain if both drivers match and neither coil rubs. Test with a 40 Hz sweep at moderate level, measure DC resistance on both cabinets, and compare driver part numbers from behind the grille.
Daily Q&A
A working 16-channel analog desk runs $150-450 used; a 32-channel digital board $700-2,500. Anything above the ceiling for its class usually means the seller is pricing the brand, not the board. Check fader wear and PSU health before you agree…
A used line array element sells for 35-50% of new, but only if the rigging hardware and manufacturer presets come with it. Without those, the boxes are expensive speakers with a mounting problem.
A used neodymium 18-inch driver sells for 150-320 USD each, or 30-50% of new. Ferrite versions go for 90-180 USD. Recone cost of 90-180 USD per driver is the number that decides whether a used driver is worth buying.
If the amp is older than 12 years and has tour hours on it, plan a recap before it goes on the road. Four 10,000 uF caps and a bench test cost 120-300 USD and prevent the failure that takes…
Sea freight for 1 cubic metre of used audio gear from China runs 90-180 USD, plus destination duty. A full 20ft container is 600-1,400 USD. Air freight is 5-8x the sea rate and rarely worth it for heavy gear.
Yes, at 1,200-1,800 USD for a tested unit with a flight case. The DM1000 is 48 channels of reliable workhorse with cheap spares, but its screen and its 2000s workflow are the reasons to think twice.
For a venue running the same show weekly, a used digital console wins. For touring where one fader must work when the screen dies, analog still earns its place. Here is how to choose.
'Like New' means under 10% cosmetic wear and no repairs. 'Excellent' allows light scuffs but must be fully functional. Neither grade says anything about age.
Expect 30-50% of new retail for 3-5 year old gear in good shape, 55-65% for near-mint with a flight case. Under 20% of new price is a warning, not a bargain.
