Yes, if the amplifier module is healthy and parts are still available. Used powered boxes save 40-60% versus new, but a dead amp module can cost $200-400 to replace, which wipes out the saving on a single unit.
Daily Q&A
Expect $180-900 for a pair of used PA speakers, $700-4,500 for a digital console and $150-1,200 for a working amp. Condition, brand parts support and local supply move the price more than age.
Usually no. China uses 220-240V at 50Hz, matching the UK, EU, Africa and the Middle East. You need a converter only for 110-127V markets like the US, Canada or Japan, and only if the label is not 100-240V.
Sea freight on used audio gear from China runs $85-160 per cubic metre to Europe plus $150-350 fixed fees. A pair of 12-inch powered tops costs $180-420 to ship, and about $300-650 landed all in.
Buy used monitors at 45-60% of new price if the drivers are original and surrounds are intact. A used Yamaha HS8 pair at $350-450 beats a new $400 pair on resale, not on features.
Check the crossfader first. It fails at 200,000-400,000 cuts, costs $90 to replace and is never mentioned in listings. A used DDJ-1000 at $700-850 is a good buy only if the faders are crisp.
Three tests catch most bad used mics: the tap test for loose capsules, a cable wiggle for worn XLR sockets, and a phantom-powered hiss check on condensers. Five minutes, no studio needed.
Yes at $900-1,300 with the flight case. The 2001-era Yamaha DM1000 still gives 48 channels at 96kHz and 100mm motorised faders, which no sub-$1,500 desk replicates. Above $1,400, buy an X32.
Buy used digital for recall and channel count, analog for repairability and resale. At $900-1,300 a used Yamaha DM1000 gives 48 channels at 96kHz; a $300 analog desk survives anything.
On used audio gear, 'Like New' means unboxed and used under 20 hours, about 60-75% of new price. 'Excellent' means working with light scuffs, about 50-65%. Neither word tells you capacitor age.
