Daily Q&A

Imported used amplifiers usually fail in the first month because of voltage mismatch, shipping shock to capacitor solder joints, or a pre-existing fault the seller masked. Each cause has a different fix and a different cost.
You need a voltage converter only if the gear's input rating does not cover your local mains. Most pro audio is 100-240 V and needs only a plug adapter. Fixed 100 V or 120 V gear needs a step-up converter…
Shipping used audio gear from China costs about $1,200-2,200 for a 1-2 tonne sea shipment (LCL) and roughly $7-12 per kg by air. A single 20 kg console by air runs $180-320; a full 20-foot container from $2,800-4,200.
Used studio monitors usually beat new ones on value: a pair that costs $700 new sells for $300-450 used, and the drivers rarely wear out. The real risk is a failed amp module on an active monitor, so test both…
When buying used DJ equipment, check in this order: jog and fader wear, USB and media ports, firmware lock state, then cosmetics. The first three decide whether the unit works; the last only decides the price.
Test a used microphone with three checks: capsule output level against a known mic, a sweep for rattle and handling noise, and a look at the grille and XLR pins. Ten minutes of testing catches the faults that cost more…
A used Yamaha DM1000 costs $900-1,400 in 2026 and still delivers 48 channels, 96 kHz capable processing and 16 motor faders. It is a good buy for installation and broadcast work, and a poor buy if you need USB audio…
For live bands and venues in 2026, a used digital console is usually the better buy: a 16-channel digital desk costs $600-1,200 used versus $1,500-2,500 new. Analog only wins when you need fast, muscle-memory mixing with no menu diving.