Description

The Meyer Sound UPA-1P is a self-powered two-way loudspeaker with a 12-inch woofer, a 3-inch diaphragm compression driver on a 100° by 40° Constant-Q horn, 550 watts of onboard amplification and 133 dB peak output. This used unit is in excellent working condition, fully tested, and available now from stock. Price on application.

The UPA-1P comes from the generation of Meyer Sound boxes that put the amplifier, the processing and the protection circuit inside the cabinet, so the system designer stops worrying about amp racks and speaker cable runs. It is a point-source loudspeaker with a deliberately practical coverage pattern: wide enough across the horizontal to cover a room from one hang, narrow enough vertically to keep energy off the ceiling and the back wall. That combination is why UPA-1Ps are still working in rental inventories, theatres and ballrooms years after they left the factory.

What is the Meyer Sound UPA-1P used for?

It covers three jobs. First, main PA for small and mid-size shows — clubs, conference rooms, wedding bands, outdoor stages up to a few hundred people. Second, stage monitoring: the trapezoidal cabinet and the 100° by 40° pattern let it sit as a wedge on the floor or as a side-fill without spilling sound everywhere it should not. Third, installed speech and music reinforcement in ballrooms, theatres, churches and corporate spaces, where a hang of two or three UPA-1Ps per side is often all the room needs.

It is also a common choice as a delay or front-fill box under a larger line array, because the voicing and the processing match the rest of the Meyer family closely enough that the transition between systems is not obvious to the audience.

How loud is the UPA-1P, and what does 133 dB actually mean?

133 dB peak at one metre is a peak figure, measured with the onboard processing and limiting in circuit. In real use you get a loudspeaker that will sit comfortably above a rock band in a 300-seat room without the compression driver sounding strained. The 12-inch woofer handles the low end down to 55 Hz, so kick drum and bass guitar come through with weight, and a single subwoofer per side extends the system for anything dance-floor oriented.

What matters more than the headline number is that the level is usable. The onboard DSP, phase correction and protection circuitry keep the box from getting harsh when you push it, which is exactly the behaviour you want from a monitor or a fill speaker that sits close to performers.

Meyer Sound UPA-1P specifications

Type Self-powered two-way loudspeaker
Low frequency 12-inch woofer
High frequency 3-inch diaphragm compression driver, 1.4-inch throat, Constant-Q horn
Coverage 100° horizontal × 40° vertical
Frequency response 55 Hz – 18 kHz (±4 dB)
Maximum SPL 133 dB peak at 1 m
Amplification 550 W total, self-powered, with onboard DSP, phase correction and protection
Mains Auto-ranging AC 90–265 V, 50/60 Hz
Monitoring RMS remote monitoring compatible
Enclosure Trapezoidal, plywood, black textured finish, rigging points
Weight Approx. 34 kg
Condition Used, excellent, fully tested, in stock

Why does the 100° × 40° pattern matter so much?

Because it solves the two problems that ruin small-room sound: too much horizontal coverage means the walls get hit and the room turns to mud, and too much vertical coverage means the ceiling and floor bounce arrive late and smear the intelligibility. A 100° horizontal by 40° vertical pattern covers a wide, shallow audience area from a single position and keeps the energy where the people are. For a low ceiling ballroom, a church with a hard back wall, or a stage monitor firing up at a vocalist, that is the right shape.

The Constant-Q horn holds that pattern across the vocal range instead of letting it narrow as frequency rises, so the person at the edge of the coverage still hears a balanced speaker rather than something thin and bright.

Is a used Meyer Sound UPA-1P still a good buy in 2026?

Yes, with one condition: you should be buying it for capability rather than for the badge. A used UPA-1P costs a fraction of a new self-powered box of the same output, it needs no external amplifier, and the auto-ranging 90–265 V supply means it works on almost any mains voltage you will meet on tour or in an install. For a rental company adding side-fill or front-fill cabinets, a venue upgrading a ballroom system, or a band that wants main PA it can also use as monitors, the value is straightforward.

The condition is service. These are older cabinets, and the amplifier modules and drivers are the parts that eventually need attention. Meyer Sound’s support network is well established and parts are obtainable, but you should budget for a check-up rather than assume a fifteen-year-old powered box needs nothing. Buy it knowing what it is and it will outlast most of the new alternatives in the same price bracket.

Where does the UPA-1P fit next to other Meyer Sound boxes?

If you already run a Meyer rig, the UPA-1P sits between the compact UPM-1P, which uses a 10-inch woofer and covers smaller rooms, and the larger UPJ and UPA full-range cabinets. Its natural companion on stage is a dedicated wedge like the Meyer Sound USM-1P 15-inch stage monitor, which shares the same self-powered philosophy and the same no-amp-rack workflow. Pairing a UPA-1P main system with USM-1P wedges gives a performer-facing and audience-facing setup that uses one type of cabling and one way of working.

If you are comparing self-powered two-way boxes more broadly, the related cabinet we stock from K-array, the K-array KF12 self-powered 2-way speaker, is a useful reference point for how a newer design trades weight and format against the Meyer’s pattern control and output.

Why buy from Used Sound Equipment?

We specialise in professional audio gear sourced from China and shipped worldwide. Every cabinet is inspected and tested before it leaves us, and we can supply multiples rather than single units where you need a matched set. Price for this UPA-1P is on application, so tell us how many you need, what you are driving and where it is going, and we will put together the right package — including other Meyer Sound cabinets and system components you are looking for.

Key Takeaways

  • The Meyer Sound UPA-1P is a self-powered two-way box with a 12-inch woofer and a 3-inch compression driver on a 100° × 40° Constant-Q horn.
  • Rated output is 133 dB peak at 1 m with a 55 Hz – 18 kHz (±4 dB) response and 550 W of onboard amplification.
  • Auto-ranging 90–265 V mains and RMS remote monitoring make it practical for touring and installed work alike.
  • Best suited to small and mid-size main PA, stage monitoring, side-fill and ballroom or theatre installs.
  • Used units are a strong value if you budget for a service check rather than assuming a powered cabinet of this age needs nothing.
Excellent In Stock

Meyer Sound UPA-1P Self-Powered Loudspeaker (Excellent, In Stock)

Ask for price

FOB price from China. Shipping quoted per destination.

Listed on November 12, 2026
Learn more

Related Q&A & Guides