Description

This is a DAS Audio RF-15.85 — the ReFerence-series two-way vented loudspeaker with a 15-inch woofer and a 1-inch exit compression driver on a rotatable 80° × 50° horn. The cabinets in the photos are the ones you will receive: black finish, hexagonal punched-steel grille with the DAS badge, rear recessed connector panel with two paralleled NL4 Speakon sockets, and the recessed pole-mount cup underneath. Condition is excellent, they are in stock, and the price is on request.

RF-15.85 is one of those boxes that did a decade of real work: club installs, corporate events, small theatres, rental fleets and side-fill duty. It is not fashionable, and that is the point — it is a 400 W passive two-way that any competent amp can drive, it aims its energy where you point it, and it survives being loaded into a van every weekend.

What the RF-15.85 Actually Is

DAS built this as a passive two-way full-range cabinet: RMS power handling 400 W, program 800 W, peak 1600 W, nominal impedance 8 Ω (7.9 Ω minimum at 50 Hz). On-axis sensitivity is 99 dB SPL at 1 W/1 m, which is why a single box on a decent amplifier reaches roughly 131 dB peak. Frequency range runs 50 Hz – 20 kHz, so it covers speech, program music and live bands without a sub for most rooms.

The low end is a 15-inch cone driver with a 3-inch voice coil; the top end is a 1-inch exit compression driver with a 2-inch titanium diaphragm feeding a rotatable 80° × 50° constant-directivity horn. Rotating that horn is the single most useful feature on the cabinet: horizontal for a wide left-right main or a front fill, vertical for a narrow throw into a deep room.

Build and Rigging

The enclosure is Wisa birch plywood in black paint with 10° side angles, so two or three boxes array cleanly. There are 12 integrated rigging points that take 10M forged steel eyebolts, which means you can fly it vertically or horizontally without a custom frame. It also sits on a pole or a stand, and DAS lists AXA-2RF15 / AXA-3RF15 for two- and three-box arrays. Weight is 26 kg — one person can move it, two should lift it.

The grille is heavy punched steel lined with acoustically transparent filter cloth, so dust and beer do not get to the cone. The rear panel carries two paralleled NL4 Speakon connectors wired to ±1, which means you can daisy-chain a pair from one amplifier channel and keep the cabling tidy.

Where These Still Make Sense

As a main PA for rooms up to about 200 people, a pair of RF-15.85 on stands over a sub is a complete, honest system. As monitors they work at moderate level — 80° × 50° is forgiving, and the trapezoid lets you angle them in. As side fills or delays in a bigger rig they earn their keep because they sound the same as the rest of the DAS inventory, and rental companies already have the amps and the speakon looms.

If you are building a passive system from scratch, budget for an amplifier that genuinely delivers 400–500 W per box into 8 Ω, plus a DSP or analog crossover at around 100 Hz if you add subs. These are not self-powered, and that is not a drawback — it means a twenty-year-old cabinet still works with whatever amp you already own.

Condition, Quantity and Shipping

The units photographed are the units sold. Grilles are straight, badges intact, cones and diaphragms are original and working, rear panels and connector plates are complete. We can supply them as single boxes or as matched pairs — tell us how many channels you are covering. Export packing, 220 V / 110 V amplifier matching and sea or air freight from China are all things we handle; ask for a quote with your destination port and quantity.

Excellent In Stock

DAS Audio RF-15.85 Two-Way 15-Inch Full-Range Speaker (Excellent, In Stock)

Ask for price

FOB price from China. Shipping quoted per destination.

Listed on October 19, 2026
Learn more

Related Q&A & Guides