Description

This is a CAF MQC-10 line array system — the MQC-10 single 10-inch passive two-way full-range array module paired with the MQC-18B single 18-inch subwoofer — in stock and available now. Price on application.

CAF (Kafu, from Foshang Dongli Kafu, a Chinese manufacturer of professional stage loudspeakers) builds the MQC-10 around Italian CIARE CH4707 compression drivers — two per cabinet — over CIARE low-frequency units. The system is aimed squarely at the work that pays the rent for most rental companies: wedding marquees, corporate events, school halls, small arenas and temple fairs, where you need a flown array that goes up fast, covers a room evenly and does not need a truck of amplifiers.

The photographs are the actual cabinets in our warehouse in China: MQC-10 modules stacked on MQC-18B subs, black painted plywood, quick-hang hardware and recessed handles. Tell us how many modules and subs you need and we will quote around your coverage.

What is the CAF MQC-10?

The MQC-10 is a single 10-inch, passive two-way line array element: one 10-inch low-frequency driver plus two CIARE CH4707 neodymium compression drivers sharing a horizontally wide waveguide. Nominal impedance is 8 Ω, rated power 400 W RMS with a 1600 W peak rating, sensitivity 98 dB (1 W / 1 m) and maximum peak SPL around 130 dB.

Frequency response runs 70 Hz to 18 kHz, and the coverage pattern is roughly 100° horizontal by 10° vertical per box, which is what makes arrays work: stack or fly several modules and the vertical slots add up into a long, tight wavefront that reaches the back of a hall without spraying the ceiling.

What does the MQC-18B subwoofer add?

The MQC-18B is the matching low-frequency partner: one 18-inch CIARE woofer, 8 Ω, 600 W RMS and 2400 W peak, with a 32 Hz – 120 Hz response and about 134 dB peak output. Used under a hang of MQC-10s it takes over everything below roughly 100 Hz, which is what lets the 10-inch modules stay clean at the top of their range.

For a wedding or a 500-seat hall, two MQC-18B per side under four to six MQC-10 modules is a realistic configuration. For smaller events, a pair of MQC-10 over a single sub is enough and packs into a small van.

How does it sound and how hard is it to drive?

It sounds like a line array should: the vertical pattern keeps the mid-band off the back wall, so speech stays intelligible in reverberant halls and the mix does not turn to mud at the rear of the room. The twin CH4707 drivers give the top end plenty of headroom without the harshness that single-driver 10-inch boxes show when pushed.

Being passive, every module and sub needs amplification and processing outside the box. Budget for an amplifier that genuinely delivers 400 to 500 W per MQC-10 into 8 Ω and 600 to 800 W per MQC-18B, plus a DSP with line-array presets or at least a proper crossover around 100 Hz. Importers who already run passive Chinese or Italian systems will recognise the wiring immediately; NL4-style connectors and 8 Ω loads keep it simple.

Rigging and build

The cabinets are painted plywood, with integrated quick-hang hinges so modules couple to each other at fixed angles and can be flown from a single point or a small frame. For ground stacks the flat top and recessed feet let you build three or four high safely. Hardware is heavy-duty, the handles are recessed, and the grilles are steel mesh with acoustic foam behind.

Weight per module is modest for a 10-inch array box — around 20 kg class — so a two-person crew can build a hang without a forklift. Ask us for the exact per-unit weights and carton dimensions for the quantity you are considering; that is what decides your freight cost.

Condition, price and shipping from China

Units are in stock and priced on application because the configuration changes the number: how many MQC-10 modules, how many MQC-18B subs, and whether you want flying frames, covers or amplifier packages included. Condition is working used stock, tested, with original CIARE components.

We export professional audio from China to buyers worldwide and handle export packing, palletising, documentation and sea or air freight to your port. Send your destination port, the number of modules and subs you want, and the amplifier power you plan to use, and we will come back with a configuration and a landed-cost estimate.

Key Takeaways

  • CAF MQC-10: passive two-way line array module, 1 × 10-inch woofer plus 2 × CIARE CH4707 neodymium compression drivers, 8 Ω, 400 W RMS / 1600 W peak.
  • 98 dB sensitivity and about 130 dB peak — a genuinely efficient array box for weddings, halls and mid-size live work.
  • MQC-18B: matching single 18-inch CIARE sub, 600 W RMS / 2400 W peak, 32–120 Hz, about 134 dB peak.
  • Both passive: you supply the amplifiers (400–500 W per top, 600–800 W per sub at 8 Ω) and a DSP or crossover.
  • In stock in China, price on application, export packing and freight arranged to your port.
Excellent In Stock

CAF MQC-10 Line Array with MQC-18B Subwoofers (In Stock, Price on Request)

Ask for price

FOB price from China. Shipping quoted per destination.

Listed on November 13, 2026
Learn more

Related Q&A & Guides