Daily Q&A

How to test a used microphone before you buy it

Answered on November 10, 2026

Speak into it from 15 cm, then from 60 cm. Listen for crackle, thin top end or dropouts. Tap the body gently and listen for rattles. Wiggle the XLR connector while speaking. If all four pass and it matches a known-good mic on the same channel, buy it.

Ten minutes of testing catches almost everything that fails on a used microphone. The failures are usually mechanical — a tired capsule suspension, a cracked solder joint on the connector, or a dirty switch — not mysterious electronic faults.

What should you listen for in the first 60 seconds?

Say a full sentence at normal volume. Then say the same sentence with the mic 60 cm away. A healthy dynamic mic changes level but keeps its character. A damaged one goes thin, dull or hollow at distance, because the capsule suspension is sagging.

On a condenser, also check for a hiss floor with no input. Old condensers with ageing capacitors hiss audibly above the room noise.

Which physical tests expose a hidden fault?

  • Tap test. Flick the grille and body with a fingernail. A dry rattle means a loose capsule mount — a $60 to $120 fix.
  • Connector wiggle. Move the XLR cable while speaking. Any crackle means a cracked solder joint on the connector.
  • Switch sweep. On mics with a pad or low-cut, click through every position 20 times.
  • Grille inspection. Dent plus rust means it was dropped and stored damp.
  • Weight check. A mic that feels light usually has a missing internal shock mount.

How do you compare two mics fairly?

Same channel, same gain, same distance, back to back. Not one after the other on different channels — that tells you nothing, because preamps differ. Use a handheld recorder at fixed gain and listen on headphones.

A/B against a mic you already trust. Ten seconds of a familiar voice on a known-good SM58 is worth more than any spec sheet.

What is a fair price for a used microphone?

TypeUsed price bandNew price reference
Dynamic handheld (SM58-class)$45 – $85$99
Wireless handheld transmitter$120 – $450$300 – $900
Gooseneck / conference dynamic$60 – $180$250 – $500
Large-diaphragm condenser$150 – $700$400 – $1,600

Wireless is where money hides. A used Shure UR2 handheld transmitter at $300 is a bargain only if the frequency band is legal in your country and the capsule threads are undamaged.

Why do wireless mics need extra checks?

Frequency coordination rules changed. In the US, the 600 MHz band was sold to mobile carriers and wireless gear operating there is now illegal to use. In Europe the 700 MHz band is restricted. A cheap used system in the wrong band is scrap metal.

Also test battery contacts for corrosion and confirm the receiver still locks to the transmitter at 30 m. Anything that drops out at 20 m in line of sight will drop out on stage. You can browse wireless options on our microphones category page, and see how a tested dynamic mic is described on the Beyerdynamic Opus 29 S listing.

Key Takeaways

  • Test at 15 cm and 60 cm — a healthy mic keeps its character at distance.
  • Tap the body and wiggle the XLR; rattles and crackles are the two common faults.
  • A/B two mics on the same channel at the same gain, never on separate channels.
  • For wireless, check the frequency band is legal where you operate before anything else.
  • Budget $45 to $85 for a used dynamic handheld; anything more needs a reason.