Description
The Rane SL1 is the original Serato Scratch Live interface. It takes the timecode signal from two turntables or CD players and turns it into control data for the laptop, while the audio you hear comes back out of the same box into your mixer. The records stop being the source of sound and become the controller. Your files stay on the computer and the platters still feel like platters.
Who is it for? DJs with two decks and a laptop, who want to keep using vinyl timecode rather than a controller. It suits a home setup, a small club booth or a backup rig. It is also one way into Scratch Live-era hardware if you already own a mixer with spare line inputs and do not want to change how you play.
Two decks is the limit. Deck A and deck B in, two line outputs out to the mixer. There is no third channel and no four-deck mode here, so plan the rig around a two-turntable setup. Most people pairing an SL1 with vinyl are running exactly that. If you need more channels, look at other DJ gear instead.
Rear Panel and Connections
The photos of this unit show the back panel clearly. Four RCA jacks sit together — two red, two white — for the two decks coming in and the two channels going out to the mixer. Next to them is the microphone jack. Then comes the port that talks to the computer, with a data cable still plugged into it in the shots.
Rane used that connector for the computer link on this model, and the photos show the matching cable attached to it. We describe it plainly rather than naming a standard we cannot verify from the unit itself. If you need to know the exact plug type to match your machine, ask and we will photograph the connector end up close.
Software: Scratch Live and Serato DJ Pro
This is a legacy device and we sell it as one. It was built for Serato Scratch Live, and that software is old now. Newer Serato DJ Pro also supports the SL1, so the hardware can still run in a current install. Check which version you are on before you commit, because support depends on it.
Drivers are the thing to plan for. USB class behaviour on hardware of this age is not a given on every new operating system, and we have not tested this unit on every OS out there. It worked on the machine we checked it with. Tell us what you run, Windows build or macOS version, and we will say what we know.
Serato licensing runs through Serato accounts, not through the box. Sort that on your side, or ask us first if you are unsure what you need. We would rather answer the question before you order than have you find out at a gig. Nothing about the software side is guessed at here.
Timecode, THRU Passthrough and the Mic
The SL1 runs at 16-bit and 44.1 kHz. That is the spec it was built to, and it is the spec timecode wants. Two line outputs feed the mixer, and the dedicated microphone input is a 6.35 mm jack with its own gain control, so you can ride the mic level on the box instead of hunting for it on the mixer mid-set.
THRU is the feature people forget about. With the software closed, the SL1 passes turntable audio straight through to the outputs. That means the deck still plays real vinyl when the laptop is off or Serato has crashed. It sounds like a small thing on paper and it matters a lot in a booth.
Power Options
You can run it from USB bus power at 5 V / 300 mA, or feed it 9 V DC from an external supply. Bus power keeps the bag light and works on most laptops. The external supply is there for when a laptop’s USB ports are weak or already loaded with a sound card, a controller and a drive.
The photos show a coiled power lead and a separate 9 V adapter sitting with this unit. We have not opened the adapter to check its rating beyond what is printed on the label. If external power matters for your rig, ask before ordering and we will read the label out and send you a photo of it.
Condition and What to Check
This is one used unit, listed as working. It came out of a working setup and we tested it. It is not a new box: expect the wear that comes with age on hardware this old, such as case marks or a worn label. The photos are of the actual unit you would receive, not a stock image.
Before you buy, work out what matters most for your rig and ask us to confirm it. We can send extra photos, read labels out, or test a specific signal path on the bench. Nothing here is guessed at and nothing is hidden. These are the points most buyers raise with us:
- Cosmetic wear: case marks, label condition, how tight the RCA jacks and the mic jack feel.
- Signal path: we can run each input and output and confirm both decks pass audio.
- Controls: mic gain and the other pots and switches, checked for crackle or dead spots.
- Data cable: we will photograph the plug end so you can match it to your computer.
- Box contents: the unit, the coiled lead and the 9 V adapter are what we see; confirm the rest with us.
Specifications
| Parameter | Value |
|---|---|
| Type | Timecode DJ audio interface / sound card |
| Sample rate / bit depth | 16-bit / 44.1 kHz |
| Inputs | 2 deck inputs (2 decks), RCA |
| Outputs | 2 line outputs, RCA |
| Mic input | Dedicated 6.35 mm jack with gain control |
| Connections | RCA in and out, 6.35 mm mic jack, USB, data cable to the computer |
| Power | USB 5 V / 300 mA bus power, or optional 9 V DC external supply |
| Software | Serato Scratch Live (legacy); newer Serato DJ Pro also supports it |
| Special features | Timecode vinyl and CD control, THRU passthrough, mic gain control |
| Condition | Used, working, one unit |
| Availability | In stock |
| Price | On application |
Buying and Shipping from China
We sell used professional audio out of our warehouse in China and ship worldwide. Gear is packed for export, and we can quote carriage to your address once we know the city and postcode. Tell us what you need and how fast you need it, and we will come back with the options that actually exist for your route.
Combined shipping is worth asking about if you are also looking at studio gear or other items in the warehouse. One carton usually costs less than two. We are happy to hold a paid item while you decide on the rest. Send your full address and any questions through the contact page and the same team that packs the box will answer.
Key Takeaways
- Rane SL1, the original Serato Scratch Live timecode interface: two decks in, two line outs, dedicated 6.35 mm mic input.
- 16-bit / 44.1 kHz, USB bus power at 5 V / 300 mA or an external 9 V supply, plus THRU passthrough for real vinyl.
- Legacy hardware: built for Scratch Live, also supported by newer Serato DJ Pro; drivers may be needed on newer operating systems and we have not tested every OS.
- One used unit, listed as working and tested; photos show the actual rear panel, cable and adapter, and we will confirm anything else on request.
- Export from our China warehouse worldwide; price is on application, so ask us with your address for a shipping quote.
