A professional recone on an 18-inch subwoofer costs $180 to $450 per driver including labour. A partial refresh, meaning new surround and spider with the original cone and coil, runs $80 to $150. Both are cheaper than a new 18-inch driver at $400 to $900, which is why reconing used subs is normal practice rather than a last resort.
What is actually replaced in a recone?
Four parts: the cone, the voice coil, the spider, and the surround. The magnet assembly and frame are reused, which is where the saving comes from, because the magnet is the expensive part of a driver. A technician cuts out the old assembly, cleans the gap, aligns a new coil in the magnet, and glues the new suspension.
The critical step is alignment. A coil that is off by a fraction of a millimetre will rub. That is why a $60 kit and a free afternoon often produce a driver that buzzes, and a $300 recone by someone who does it weekly produces one that works.
When is a recone the right call?
- The frame and magnet are intact and the basket is not bent.
- The driver is a brand and model you cannot easily replace, like an OEM sub in a matched array.
- You need the exact Thiele-Small parameters to match an existing cabinet.
- You own several identical subs and want to keep them consistent.
When it is the wrong call: the magnet is cracked or the frame is rusted through, the driver is a generic part you can buy new for $120, or the recone quote is above 70 percent of a new replacement. Past that threshold, replace the driver.
What does the price breakdown look like?
| Job | Parts | Labour | Total |
|---|---|---|---|
| Surround + spider refresh | $40-$80 | $40-$70 | $80-$150 |
| Full recone, generic driver | $90-$180 | $90-$150 | $180-$330 |
| Full recone, branded driver | $150-$300 | $120-$180 | $270-$450 |
| New 18-inch driver | – | – | $400-$900 |
How do you know a sub needs a recone and not just a new surround?
Play a slow 30 to 60 Hz sweep at low level. A rattle that appears at one frequency and disappears is usually a cone or grille issue. A continuous scratching sound across the sweep means the coil is rubbing and needs a full recone. A buzzing at high excursion only usually means the surround is separating and a refresh will fix it.
Push the cone gently by hand, straight in, and listen. Any scraping is coil rub. If it moves silently and springs back smoothly, the suspension is healthy and your problem is elsewhere, possibly the cabinet.
Is shipping a subwoofer for repair ever worth it?
An 18-inch driver weighs 8 to 14 kg and ships in a 50 cm cube. International round-trip shipping at $80 to $160 usually costs more than the recone itself. If you import used subs from China, ask the exporter to recone before shipping; it is cheaper to do it at origin than to send it back. That is one reason sourcing used subwoofers through a dealer who inspects before loading saves money later.
What should you ask a recone shop before agreeing?
- Will the recone use an original or OEM-spec coil? A cheap generic coil changes the parameters.
- Is the finished driver tested for rub and swept up to full excursion?
- What is the warranty period? 90 days is standard; 12 months is good.
- Will they measure and provide the resulting Thiele-Small parameters?
One last honest note: a reconed sub never quite matches a factory original in parameter tolerance. In a pair, recone both. A matched pair with two new coils beats one original and one reconed every time, because the mismatch shows up as uneven output at the crossover.
Key Takeaways
- Full 18-inch recone: $180-$450 with labour. Surround and spider refresh: $80-$150.
- A new branded driver costs $400-$900, so reconing usually wins.
- Continuous scratching across a sweep means coil rub, which needs a full recone.
- Recone at origin when importing; round-trip shipping costs more than the job.
- In a pair, always recone both drivers to keep parameters matched.
