Description
Two twelves instead of one eighteen
The obvious question with a dual 12 sub is why not just buy a single 18. The answer is in how the box behaves. Two smaller cones sharing the load move less per driver for the same output, which keeps the mid-bass region tighter and gives you a faster transient response. In a small club or a corporate room that reads as punch rather than rumble, and it integrates more easily under a pair of 12-inch tops.
Specifications
| Parameter | Detail |
|---|---|
| Type | Active direct-radiating subwoofer, vented bass reflex enclosure |
| Configuration | 2 x 12-inch low-frequency drivers |
| Amplifier | Onboard Class D, actively processed |
| Power handling | 1000 W program / 2000 W peak |
| Frequency response | 38 Hz – 150 Hz (-6 dB) |
| Maximum SPL | 132 dB peak |
| Crossover | Onboard DSP, variable low-pass 60 – 150 Hz |
| Inputs | 2 x balanced XLR / 1/4-inch combo |
| Outputs | 2 x balanced XLR link through |
| Cabinet | Vented plywood, textured black finish |
| Rigging | M20 pole socket on top, rubber feet |
| Dimensions | Approx. 400 x 620 x 520 mm |
| Weight | Approx. 30 kg |
What it is built for
The P212S is a working box. The cabinet is 15 mm plywood rather than particle board, the finish is a textured coating that survives load-in, and the grille is steel with a foam backing. The M20 socket on top means you can pole-mount a top cabinet directly onto the sub, which turns a pair of these into a complete small system you can carry in a hatchback.

Onboard amplification and DSP
The amplifier module is Class D with an integrated DSP section handling the low-pass filter and limiting. Low-pass is variable across the 60 to 150 Hz range, so you can dial it to match whatever tops you are pairing with, and there is a phase reverse switch for aligning multiple boxes. Connections are combo XLR/TRS on the input side with XLR link outputs to chain subs together.

Condition and what you receive
The unit in these photos is used and in good working order. The cabinet shows the usual marks from handling and transport that you would expect on a rental subwoofer, visible in the photos, but the drivers are intact, the grille is straight, and the amplifier powers up and passes signal correctly. It is sold as a single box.

Using it in a real system
A single P212S works as the low-end anchor for a two-top setup in a bar or small hall. Pair two of them and you have enough headroom for a 200 to 300 capacity room with live drums. Because the box is actively crossed and limited, you do not need an external processor to protect the drivers, which removes a piece of gear from the rack and a set of cables from the case.

Shipping and inspection
We ship from China with the subwoofer crated and padded for international freight. Before it leaves we can send additional photos of the drivers, the amplifier module and the rear panel on request, and we test the box through a signal sweep at power so you know exactly what arrives. If you want specific photographs of a particular area of the cabinet, ask before ordering and we will take them.

Key takeaways
Dual 12-inch active subwoofer from The Stage Giant, the pro-audio brand of P Audio. Onboard Class D amplifier with DSP crossover and limiting. 38 Hz to 150 Hz response with 132 dB peak output. Variable low-pass from 60 to 150 Hz. Balanced combo inputs with XLR link outputs. M20 pole socket so a top cabinet can be mounted directly on the box. Used, working, available now. Price on request.
More views




