Description
The Meyer Sound USM-1P is a self-powered 15-inch stage monitor built for demanding live work. It takes Meyer Sound’s compact monitor know-how — a 15-inch low-frequency driver, a horn-loaded high-frequency section and onboard amplification with Meyer’s own processing — and puts it in a rugged box designed to sit at the front of a stage all night. This used unit is in excellent condition, fully tested, and available from stock.
Meyer Sound monitors earned their place on tour because they are consistent: a wedge you can trust to sound the same at every show, on every stage, without a rack of external amps and processing to carry. The USM-1P follows that philosophy. Everything the driver needs is inside the cabinet, so setup is one power cable and one signal cable, and the performer hears a stable, feedback-resistant monitor mix rather than whatever the house system is doing.
What is the Meyer Sound USM-1P used for?
It is a stage monitor first — a wedge for vocalists, drummers, guitarists and front-line performers who need their own mix. Because it is self-powered and quick to deploy, it also works as a compact fill speaker or side-fill in small rooms, and as a utility cabinet for corporate AV and houses of worship where a reliable, good-sounding box matters more than a huge PA. Its 15-inch format gives it enough low end for drums and bass without needing a sub in most stage-monitor situations.
How loud is the Meyer Sound USM-1P?
Meyer Sound power their monitors to cut through a live stage, and the USM-1P is no exception. The combination of a 15-inch low-frequency driver and a horn-loaded high-frequency driver, driven by a generously specified onboard amplifier with integrated limiting, delivers high continuous output with clean peaks — enough to sit above a loud band and still stay composed. The onboard processing protects the drivers and keeps the response consistent as level rises.
Meyer Sound USM-1P key specifications
| Type | Self-powered stage monitor |
| Low frequency | 15-inch driver |
| High frequency | Horn-loaded compression driver |
| Amplification | Onboard, bi-amplified with integrated processing and limiting |
| Enclosure | Monitor wedge cabinet, road-ready construction |
| Connectors | XLR input and loop-through output, IEC mains |
| Use | Stage monitor, side-fill, utility fill |
| Condition | Excellent, fully tested |
Why do people still buy Meyer Sound monitors?
Because they last, and because they are predictable. A Meyer wedge designed a decade or more ago still earns its keep on stages today — the drivers and processing are built to a standard that keeps the box sounding the same after years of trucking. For a rental company, owning a set of Meyer monitors means clients get a known quantity, and for a band or venue it means one less thing to worry about on show day. Spares and service support are well established, so a used cabinet is a low-risk purchase.
Is a used Meyer Sound USM-1P a good buy?
Yes, if you want genuine Meyer Sound monitoring without new-consoles money. Buying used here means you get the same sound and reliability engineers pay a premium for, at a fraction of the price of a new wedge, and self-powered cabinets skip the amp racks and cabling of a passive system. For a rental house building out a monitor world, a church upgrading its stage, or a band that wants its own trustworthy wedges, a used USM-1P is a smart move.
Why buy from Used Sound Equipment?
We specialise in professional audio gear sourced from China and shipped worldwide. Every cabinet is inspected and tested before it leaves us. Price is on application for this unit, so tell us how many you need and we will put together the right package, including any other Meyer Sound cabinets and system components you are looking for.
