Condition labels on used audio gear are not regulated. Two sellers can both write “Excellent” and mean different things. In practice, a working export-grade scale runs like this: Like New, Excellent, Very Good, Good, For Parts. Only the top two are worth paying a premium for, and only if you know what each promises.
The confusion is worse across markets. Listings under “used speakers for sale UK” tend to follow the trading standards style description, while listings from Asia use looser wording. That gap is where buyers get burned.
What does each grade actually promise?
| Grade | Cosmetics | Function | Price vs new |
|---|---|---|---|
| Like New | No visible marks, original box often | 100% tested, no repairs | 60-70% |
| Excellent | Light scuffs on cabinet, clean grille | 100% tested, all original parts | 45-60% |
| Very Good | Scratches, small dents | Works fully, some wear items replaced | 30-45% |
| Good | Heavy cosmetic wear | Works, may have faults noted | 20-30% |
| For Parts | Anything | Not tested or not working | 5-15% |
Why is “tested” the word that matters most?
Cosmetics are easy to photograph and hard to fake, so most sellers are honest about them. Function is the opposite. A speaker can look flawless and still have a voice coil rubbing, or a console can pass audio on channel 1 and be dead on channel 9.
Ask specifically: how many channels were tested, at what signal level, and for how long. A serious exporter will say something like “all 16 channels swept at 1kHz for 30 minutes, HF and LF drivers impedance-checked”. Vague answers are a grade problem.
There is a guide worth reading on how to test a used PA speaker before you accept any label at face value.
What hidden costs sit inside a cosmetic grade?
Grilles and foam are the quiet budget killers. Foam decay on older speakers is common after 10-15 years, and re-foaming a pair of 12-inch drivers costs $80-160 in parts. Rusted grilles are cosmetic until you find the horn throat has been eaten by moisture.
- Recone or driver replacement: $90-200 per driver.
- Re-foam: $80-160 per pair.
- Potentiometer or fader replacement on consoles: $8-25 per part, plus labour.
- New flight case or cover if missing: $120-400.
A “Very Good” unit at 35% of new with $200 of re-foaming pending is worse value than an “Excellent” unit at 55% that needs nothing.
Should you buy Excellent or Very Good?
If the gear will earn money at events, buy Excellent. The 15% price gap over Very Good buys you more remaining driver life and less downtime, and downtime at a gig costs more than the gear.
For home studio, rehearsal rooms or backup stock, Very Good is the smarter buy. Cosmetic scuffs don’t affect sound, and the savings pay for a spare.”
What should be written on the invoice?
Get the grade on the commercial invoice, not just the listing. Something like “Pair Peavey NC-110, graded Excellent, tested working, cosmetic: light cabinet scuffs”. That wording matters if the goods arrive with a dead driver — a documented grade is a documented claim.
A pair of Peavey NC-110 passive 10-inch two-way speakers in Excellent shape with invoice wording is a straightforward purchase. The same pair labelled “as described” is a gamble.
How do you spot a grade that is too generous?
Count the photos. A real grading process photographs the cabinet corners, the grille, the rear panel with serial number, and the connector plate. Four photos for a speaker pair is thin; ten is normal.
Then look at what is missing. No rear panel shot usually means the connector plate is corroded, and that is where moisture gets in. No serial number visible is a resale problem and often a sourcing problem too.
Finally, check whether the grade covers both units of a pair. “Excellent” applied to a pair where one cabinet was resprayed is not the same as two matching units.
Key Takeaways
- Like New should mean no visible marks plus full function, at 60-70% of new price.
- Excellent allows light cabinet scuffs, but no replaced drivers and no faults.
- “Tested” is the only word that carries weight — ask for channels, level and duration.
- Budget $80-200 per speaker pair for foam and driver wear at the Very Good grade.
- Put the grade wording on the commercial invoice, not just the listing.
