A used line array system costs $6,000-40,000 in 2026, and the box count explains less of that spread than people assume. A six-box small-format array with a single sub and one amp rack sits near the bottom. A full touring rig from a major brand, with frames, fly bars and 16 boxes, sits near the top. The trap is buying boxes and then discovering the rigging hardware is the expensive half.
What is actually in a line array system?
- Array elements – the boxes themselves, usually sold in matched groups.
- Subwoofers – often a separate model, often not included in a quoted price.
- Fly frame and bumper – $800-3,000 depending on brand, and often missing.
- Amp racks and processing – the factory preset matters; without the right DSP the boxes do not sound like the design.
- Loom and interconnects – every system speaks its own connector language.
The cheapest system is the complete one. A complete four-box package at $9,000 beats four boxes at $5,000 when you need a $2,500 frame and $1,200 of cabling to run it.
Which brands hold value?
NEXO, L-Acoustics, d&b and Meyer hold the most, because rental riders name them. A NEXO GEO S1230 rig with RS15 subs keeps a resale floor that generic boxes do not. Mid-tier brands lose 60-70% in five years; the top four lose maybe 35-45%.
| System size | Typical used price | Room size |
|---|---|---|
| 4-6 boxes + 1 sub | $6,000-14,000 | 300-600 cap |
| 8-12 boxes + 2-4 subs | $15,000-28,000 | 800-2,000 cap |
| 16+ boxes, touring | $30,000-40,000+ | 2,000-5,000 cap |
Why do the amp presets matter so much?
A line array is a system, not a speaker. Each box is tuned to combine with its neighbours at a specific angle, and the factory presets encode that tuning. Put the wrong amp or a generic preset behind a GEO box and you get a curved array that does not throw.
Before buying, confirm which amplifier the system was designed for and whether those amps are included. If they are not, budget for a replacement rack and for someone with the manufacturer’s software to load the right presets. This is where most second-hand line array purchases go wrong.
What does rigging certification cost?
In many jurisdictions a flown array needs a structural check and an engineer’s sign-off every year or every install. Hardware inspection on a used rig runs $300-800, and any deformed shackle or bent fly bar means replacement, not repair. Never fly a rig with hardware whose history you do not know.
Have a look at this NEXO GEO S1230 line array with RS15-C subwoofers as a complete starting point, and read what a PA speaker test guide says about checking each element individually.
Key Takeaways
- Used line arrays: $6,000 for a small rig up to $40,000 for touring systems.
- Frames, amp racks and looms can add 40% to a box price.
- NEXO, L-Acoustics, d&b and Meyer hold resale value; generic boxes do not.
- Confirm factory amp presets before buying, or budget a new rack.
