Description

This is a working NEXO rig out of a rental fleet, not a single box pulled off a shelf. The photos show GEO S1230 line array elements stacked alongside RS.15-C subwoofers — roughly twenty cabinets in total, all matte black, all with the original NEXO grilles still taut and undamaged.

What is actually in the lot

Two model plates were legible on close inspection. One cabinet carries a GEO S1230 barcode label, serial 060001285. Another carries an RS.15-C label, serial 106800133. Both are French-built NEXO product — the “Made in France” line is printed on the plate next to the CE mark, not added later.

Beyond those two confirmed plates, the rest of the stack is the same family. The GEO S series is NEXO’s compact line array range, and the RS.15-C is the matching 15-inch subwoofer that flies or ground-stacks with it. If you need an exact count of each model before committing, say so and we will walk the rack and photograph every plate.

Condition, honestly

These cabinets have been used. Edges and corners show light scuffs and touched-up paint, which is normal for flown boxes that get loaded in and out. What I did not find: cracked grilles, dented baffles, missing rigging hardware, or torn foam. The recessed flying inserts are all present on the tops.

Rear panels use NL4 Speakon connectors with the input/link pairs marked LF and HF, plus the passive/active selector. That is the standard NEXO wiring scheme — one NL4 per cabinet, daisy-chain through the second pair. If you are dropping these into an existing NEXO system with NXAMP processing, the presets are published and the cabinets will load without rewiring.

What I have not verified

I have not powered these up or swept them. No impedance measurement, no driver sweep, no controller test. That is deliberate: I would rather hand you an honest “untested” than a number I invented.

What I can do on request:

  • Photograph every model plate and serial number individually
  • Read DC resistance across each cabinet’s NL4 pins and report the figures
  • Shoot a short video of a test tone through one element and one sub
  • Give you a count broken down by model once we walk the stack

Why buy a used GEO S rig

The GEO S series has been out of production for a while, which cuts both ways. On the down side, spare drivers come from donor cabinets. On the up side, the boxes are cheap relative to what they do, the rigging is simple and mechanical, and NEXO’s processing presets are still in circulation — so a used S1230 array can be up and flying for a fraction of a new compact line array.

For a rental house adding a second small system, a church upgrading from point-source, or a club that wants a real line array without a new-array budget, this is the sort of lot that makes sense. It is also the sort of lot where you want to inspect before you commit, which is exactly why the price is on request rather than posted.

Shipping and export

Cabinets ship from China. Twenty-plus boxes is a pallet-scale shipment, not a parcel — expect to move it as groupage or a partial container depending on your destination. We crate, we document, and we can quote both FOB and delivered terms once we know the port.

Tell us how many elements and how many subs you actually need, and we will price the lot accordingly. Splitting the stack is fine.

Quick Summary

  • Models: NEXO GEO S1230 elements and RS.15-C subwoofers
  • Confirmed serials: GEO S1230 060001285, RS.15-C 106800133
  • Quantity: approximately 20+ cabinets in the stack
  • Connectors: NL4 Speakon, LF/HF marked, passive/active selectable
  • Condition: good working condition, light road wear, grilles intact
  • Tested: no — not powered or swept, sold as inspected
  • Price: on request, depends on how many cabinets you take
  • Stock: in stock, can split the lot
Good In Stock

NEXO GEO S1230 Line Array Elements with RS.15-C Subwoofers

Ask for price

FOB price from China. Shipping quoted per destination.

Listed on October 28, 2026
Learn more

Related Q&A & Guides