Most imported audio gear needs a plug adapter, not a converter. Read the rear label first. If it says 100-240V or 220-240V with 50/60 Hz, the switch-mode supply handles your mains and you need a $3 travel adapter. Only gear marked with one fixed voltage — 120V only, or 230V only — needs a transformer, and you size that at 1.5 times the rated current.
Every year people buy a $200 transformer for a speaker that never needed one, then complain the transformer hums. The label decides, not the plug shape.
Where is the voltage printed on audio gear?
On the rear panel near the power inlet: a small sticker beside the IEC socket, or moulded into the plastic. Powered speakers have it next to the mains inlet. Consoles have it near the PSU connector, and consoles with external supplies have it on the PSU brick instead.
If the label is gone, ask the seller for a photo of the rear panel with the cable unplugged. Any exporter shipping 40+ units can send that in a minute, and a seller who won’t is hiding either a missing label or a re-terminated power cable.
Which countries are actually 100-127V?
| Mains | Markets | What you need |
|---|---|---|
| 230V / 50Hz | EU, UK, most of Africa, Middle East, China, Australia | Plug adapter if gear is 100-240V |
| 120V / 60Hz | USA, Canada, Mexico | Plug adapter; step-up only if gear is 230V-only |
| 100V / 50-60Hz | Japan | Step-down transformer for 230V gear |
| 127V / 60Hz | Brazil | Check the label; wide-range is common |
Note the frequency. A transformer changes voltage, never frequency. Gear with a synchronous motor or a mains-referenced clock will run at the wrong speed on 50 vs 60 Hz, and no converter fixes that.
What size transformer do you need?
Take the rated current or wattage on the label and multiply by 1.5. A 400W powered speaker gets a 600W transformer. Class D amplifiers can pull three times rated current for a fraction of a second on power-up, and an undersized transformer trips or browns out on every switch-on.
Costs, roughly: 500W step-up $60-$120, 1000W $120-$220, 2000W $180-$380. The 2000W units weigh 12-18 kg, and that weight is freight you pay for twice if you ever move.
When is a transformer the wrong answer?
- Multiple devices: one transformer per device, or you’re chaining strips and stacking loads.
- Anything with a switching supply: 90% of gear made after 2010 already handles 100-240V.
- Amplifiers above 1 kW: a 3 kW transformer costs more than swapping to the right-voltage amp.
- Anything where hum would be audible: cheap transformers buzz at 50/60 Hz and the buzz gets into the signal path.
If you’re buying a rack of amps for a 120V country, buy 120V amps. Our amplifier category lists what’s available with voltage stated per unit, which saves guessing.
What about plug types?
Buy the right cable, not an adapter daisy-chain. An IEC C13-to-local-plug cable costs $3-$8 and replaces a $2 adapter that falls out. For UK, use a fused plug; the fuse protects the cable, not the gear, but an unfused plug on a 13A circuit is a fire risk that insurers ask about.
Also check the inlet type. Some older consoles use IEC C14, some use proprietary 3-pin connectors, and a few Japanese-market units use a 2-pin inlet with no earth. Earthing is not optional on metal-chassis gear.
How does this apply to the gear on this site?
Everything we list is tested for its stated voltage, and most modern powered boxes accept 100-240V. A worked example: the K-array KF12 self-powered speaker takes wide-range mains, so a buyer in the EU or the US adds a cable and plugs in. A 2003-era console like the DM1000 is a different case — check its specific label, because fixed-voltage versions were sold per market.
Ask for a photo of the rear label with any quote. It takes the seller 30 seconds and settles a $200 question.
Key Takeaways
- Read the rear label before buying anything: 100-240V means a $3 plug adapter, nothing more.
- Only fixed-voltage gear needs a transformer. Size it at 1.5x the rated wattage.
- Transformers change voltage, never frequency. 50 vs 60 Hz matters for motors and clocks.
- 2000W transformers cost $180-$380 and weigh 12-18 kg. For a rack of amps, buy the right voltage instead.
