Three tests cover 90% of used mic problems: a gentle tap test for capsule damage, a hum check with the connector half-inserted for grounding faults, and a 30-second loud passage to expose diaphragm distortion. Total time about six minutes. Bring your own cable and a way to monitor.
What does the tap test reveal?
Tap the grille lightly with a fingernail while monitoring. You should hear dull thuds, not a rattle or a scraping sound. A rattle means a loose capsule mount or debris inside. Scraping suggests the diaphragm has been pushed in and is touching something.
A dented grille is cosmetic and normal on any mic that has worked. A rattling one was dropped and is a negotiation point, not a pass.
How do you spot a condenser that has been kept damp?
Condenser capsules hate humidity. Look for a faint white film on the diaphragm (visible through the grille with a torch), and listen for a hiss that never goes away even in a quiet room.
Ask how it was stored. A condenser that lived in a garage in a humid climate for two years is a $150-400 recap-capsule gamble. Dynamic mics survive that treatment; condensers often do not.
Which connector checks matter most?
- Wiggle the XLR while signal passes — crackle means a worn connector or cold solder joint ($10 fix)
- Check for a bent pin — a broken pin means a new connector body ($15-25 in parts)
- Unscrew the body and look for a corroded PCB or a swollen capacitor on older condensers
- Confirm the capsule is original — mismatched capsules cut resale by 30%
Do SPECS AND SERIALS matter at resale?
Yes, more than people think. A used SM58 without a box still sells instantly; a used condenser without its shock mount and case can lose 20-30% of value. Ask for the shock mount, the case, the original cable if it uses one, and any pad or rolloff accessories.
Serials are worth photographing on any mic over $300 used. It is the only defence against stolen gear, and it helps date a model revision.
What is a fair price?
| Type | Used price 2026 | New price | Checks that matter |
|---|---|---|---|
| Dynamic vocal (SM58 class) | $60-120 | $110-160 | Grille, connector, rattle |
| Large-diaphragm condenser | $150-400 | $400-900 | Capsule film, hiss, shock mount |
| Drum mic kit, 7 pc | $180-350 | $350-600 | Clips present, all 7 working |
| Condenser pair for overheads | $250-600 | $700-1,400 | Matched response, cases |
Drum kits often arrive missing two clamps — budget $12-20 each to replace. That is the most common hidden cost in a used drum mic set.
When do you walk away?
Walk if the capsule rattles, if the condenser hisses in a quiet room, or if the seller will not let you open the body. Battery-powered mics with a leaking cell and a corroded board are also a hard no — the acid eats traces.
Key Takeaways
- Tap test for rattle, not for dents.
- Condensers: check for white film and permanent hiss.
- Wiggle the XLR while signal passes — crackle is a $10 fix, not a deal breaker.
- Missing accessories cost you 20-30% at resale.
- Used SM58-class dynamic mic: $60-120 in 2026.
Browse the used microphone category for current stock and accessory notes.
