Daily Q&A

How many used speakers do you need for a 300-person venue?

Answered on October 28, 2026

Budget 4-6 top cabinets and 2-4 subs, with 2-4 kW of total amplification, for 300 people indoors at 100-105 dB(A). The number that actually decides the count is coverage angle, not wattage. A 90 x 60 degree box covers far less of a wide room than its power rating suggests.

What SPL do you actually need?

105 dB(A) at the back of the room with 10 dB of headroom above that for peaks. Dance floors want 102-108 dB(A) sustained; a corporate dinner wants 90-95. Be honest about which one you are building.

Sound drops about 6 dB per doubling of distance. At 15 metres from the stage you lose roughly 23 dB, so a box that does 130 dB peak at 1 m delivers about 107 dB at the back. That is one good cabinet for a narrow throw — and four for a wide room.

How does room width change the answer?

A 90-degree horizontal box covers 90 degrees, which at 12 metres is about 24 metres of width. A room 8 metres wide needs one per side. A 20-metre-wide room needs two per side flown with a slight splay.

Clubs with low ceilings are the hard case. You cannot fly, so you stack, and stacking 2 x 2 puts 4 cabinets into the first 3 metres of throw. That is when you switch to a line array element or accept rear fill.

How many subs?

Room typeCapacityTopsSubs (18″)Total amp
Bar with DJ100-1502-41-21.5-2.5 kW
Club floor3004-62-43-5 kW
Wedding / function hall300422-3 kW
Live music venue3004-644-6 kW

Sub count is set by how much 40-80 Hz you want, not by the tops. Two 18-inch subs is the minimum for a 300-person dance floor, and four if you play electronic music.

What does this cost used?

A 4-top, 2-sub rig built from used 12-inch active boxes and 18-inch subs lands around $2,400-4,200 from China, before freight. That is 50-60% under equivalent new gear, and the spread comes mostly from cabinet condition rather than brand.

Add $100-150 per speaker for freight on a small shipment. Our used K-array KF12 cabinets are a realistic example of the mid-tier of that budget.

What is the mistake people make?

Buying 8 cheap boxes instead of 4 good ones. Eight overlapping cabinets create comb filtering, and the room sounds worse than the measured SPL suggests. Fewer, better-aimed boxes almost always beat more boxes.

The second mistake is skipping processing. $300 on a used digital processor with delay and EQ per output does more for coverage than $900 on an extra pair of tops.

Key Takeaways

  • 300 people indoors: 4-6 tops, 2-4 subs, 2-4 kW total.
  • Target 105 dB(A) at the back with 10 dB headroom.
  • Coverage angle decides cabinet count, not wattage.
  • Used cost for such a rig from China: $2,400-4,200 before freight.
  • Fewer better-aimed boxes beat more cheap boxes.

Size the rest of the system in the PA systems category.