Count your inputs, then add 30 percent. A four-piece rock band with a mic’d kit uses 14 to 16 inputs before anyone says hello. A 16-channel console is therefore not enough, because two channels will be dead or noisy and a guest singer shows up at soundcheck.
How many inputs does a typical band really use?
Working counts most small touring rigs run:
- Trio, acoustic-leaning: 8-12 inputs
- Four-piece with acoustic drums: 16-20 inputs
- Five-piece with keys and two guitars: 22-28 inputs
- Cover band with horns: 30-40 inputs
A seven-piece kit alone eats 6 to 8 channels once you mic the snare top and bottom and add two overheads. Vocals usually take 3 to 5. That is 11 before bass and guitars.
Why should you buy more channels than you need?
Three reasons, all practical. Dead channels on used gear are normal: on a 2019 check of a rack of second-hand desks, roughly 1 in 14 input strips had at least one scratchy pot or a dead insert. Second, aux sends scale with channels on most desk families, so a bigger desk means more monitor mixes. Third, resale: an 32-channel desk sells faster than a 16-channel of the same series.
What desk size fits which band size?
| Band size | Console | Used price range |
|---|---|---|
| Trio, small venues | 16-ch digital | $400-900 |
| Four to five piece | 24-32 ch digital | $900-2,200 |
| Touring club band | 32-48 ch digital | $1,800-5,500 |
| Theatre, corporate | 48 ch with scene recall | $2,400-9,000 |
Is an older big console better than a newer small one?
Usually yes, if the desk has digital recall. A Yamaha DM1000 digital mixing console has 48 input channels and 16 mix buses in a footprint that fits a car boot. Newer 16-channel desks have better preamps and worse routing. For a band that plays different rooms every week, recall matters more than preamp polish.
The catch is weight and spares. The DM1000 is around 16 kg with the meter bridge, and it uses a Yamaha-specific PSU you cannot buy at a corner shop. Ask for the PSU part number and check stock before committing.
What should you check on a used console before paying?
- Every input pot swept with a signal, listening for crackle
- Phantom power on at least 4 channels, measured with a meter, not just the LED
- Fader travel on all channels, including the last 4 which wear fastest
- Scene store and recall on digital desks, twice, with a power cycle between
- Screen and encoders, which are the expensive replacement parts
Key Takeaways
- Add 30 percent to your real input count when buying used.
- A four-piece band with a mic’d kit uses 16 to 20 inputs.
- Roughly 1 in 14 used input strips has a dead pot or insert.
- A used 48-channel digital desk costs less than a new 16-channel one and resells faster.
- Check the PSU part number and its availability before you buy any older desk.
How do you count inputs on a drum kit honestly?
Kick, snare top, snare bottom, hi-hat, two rack toms, floor tom, overhead left, overhead right. That is nine on a kit that deserves it. Most club shows mic the kick, snare top and two overheads, which is four. The difference between nine and four is the difference between a 16-channel desk being enough and being tight.
Add a talkback or a playback channel and a spare for a guest, and a five-piece needs 24 channels to work comfortably. Anyone selling you a 16-channel desk for a five-piece band is selling you a compromise.
Do aux sends limit the band more than channel count?
Often yes. Four monitor mixes is the practical minimum for a five-piece, and six is comfortable. Many 16-channel analog desks offer only two. On digital desks, aux count is fixed per model, so it is worth checking before anything else: a 32-channel desk with four auxes is worse for a band than a 24-channel desk with eight.
What is a realistic budget for each size?
- 16-channel used digital, 4 auxes: $450-900
- 24-channel used digital, 6-8 auxes: $900-1,600
- 32-channel used digital, 8-16 auxes: $1,400-2,800
- 48-channel used digital: $1,800-5,500
